Search Results for Guide Specifications

Three-part (General, Products, Execution) construction specifications for a specific pavement assembly that provides salient information and notes to the specifier who then modifies the guide specification to apply to specific conditions in a project.

Search Results for Guide Specifications

This guide specification is for applications of concrete pavers adhered with a neoprene mastic to a bitumen-sand setting bed and tack coat over a concrete base.

This guide specification is for concrete paving slabs adhered with a neoprene mastic to a bitumen-sand setting bed and tack coat over a concrete base.

This guide specification for the U.S. is for the construction of a new or rehabilitative overlay of concrete pavers and bedding sand over a concrete base for use in arterials and major thoroughfares.

Downloads:

This guide specification is for concrete grid units placed on a sand bedding course over a compacted dense-graded aggregate base.

Downloads:

This guide specification for is for the construction of a new or rehabilitative overlay of concrete pavers and bedding sand over existing asphalt, concrete, or aggregate base.

This guide specification is for applications of concrete pavers adhered with polymer adhesive onto a rigid base, typically cast-in-place concrete.

This item shall consist of a surface course composed of interlocking concrete pavers set in bedding sand on an approved base course constructed in accordance with the Plans and Specifications. All pavers shall be manufactured for the construction of paved surfaces to be trafficked by jet or propeller driven aircraft.

This guide specification is for pavers used as ballast and/or paving on pedestrian plaza roof deck applications with an aggregate setting bed over an optional drainage mat.

This guide specification is for concrete pavers mortared to a concrete base and grouted joints for exterior applications

This guide specification for concrete paver applications for concrete pavers and bedding sand over a compacted aggregate base for pedestrian and vehicular applications.

 

This guide specification for concrete paver applications and bedding sand over a compacted aggregate base for pedestrian and vehicular applications.

This guide specification is for concrete pavers on a sand bed with geotextile over a cement treated base (CTB).

This guide specification is for paving slabs supported by pedestals for pedestrian roof plaza decks.

This guide specification is for permeable interlocking concrete pavement.

This guide specification is for paving slabs on a sand bed over concrete for pedestrian applications.

This guide specification is for paving slabs mortared to a concrete base and grouted joints for exterior applications.

This guide specification is for paving slabs on a sand bed over a compacted aggregate base for residential pedestrian and driveway applications.

This guide specification is for paving slabs used as ballast and/or paving on pedestrian plaza roof deck applications with a free draining aggregate setting bed and no joint materials.

This guide specification for the U.S. is for the installation of concrete tile paving units whose thickness are less than the minimum 2 3/8 in. (60 mm) required to conform to ASTM C 936.

Downloads:

This guide specification covers the requirements for constructing a permeable interlocking concrete pavement for pedestrian and vehicular uses such as parking lots, alleys and low-volume roads.